Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Tarzana?
Fireplace services in Tarzana typically run $199 to $425 for a standard sweep and inspection, with most homeowners landing near the lower half of that for a single fireplace. Repair work is priced separately: a HeatShield ceramic resurfacing job usually falls between $600 and $1,400, and a DuraFlex liner installation runs $1,800 to $4,500 depending on flue height and configuration. The written estimate sets the final price, and estimates are free.
We’re Chimney Sweep Tarzana, and we’ve served homes here for 12 years, since 2014. Our scope is narrow on purpose: chimney sweeping, dryer vent cleaning, and chimney repair. That’s it. When you call about a fireplace that smokes or a flue you haven’t had looked at in years, you reach the same team that stocks the liners and does the masonry work, not a call center that subcontracts the job out.
Call (877) 269-3953. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Standard sweep and inspection: $199 to $425
- HeatShield ceramic flue resurfacing: $600 to $1,400
- DuraFlex flexible liner installation: $1,800 to $4,500
- Dryer vent cleaning: $125 to $275
- Estimates are free; the written estimate sets the final price
Fireplace Services Cost Breakdown (2026)
These are typical estimated ranges for the Tarzana market this year. A ranch house in Tarzana south of Ventura Boulevard with a single heatalator fireplace is a very different job from a two-story with a masonry chimney and a stove insert, so treat the ranges as a starting point. Every price you’ll see from us comes in a written estimate before any work begins.
| Service | Typical Range | What’s Included |
|---|---|---|
| Chimney sweep + Level 1 inspection | $199 – $425 | Creosote removal, firebox and damper check, visual flue inspection |
| Dryer vent cleaning | $125 – $275 | Full lint removal, duct run check, exterior termination check |
| HeatShield ceramic flue resurfacing | $600 – $1,400 | Repairing cracked or deteriorated liner joints without full relining |
| DuraFlex flexible liner installation | $1,800 – $4,500 | New stainless liner, insulation, cap and top plate fitted to the flue |
| Firebox and damper repair | $350 – $900 | Brick and mortar repair, damper repair or replacement |
| Chimney cap and crown work | $275 – $800 | Cap fitting, crown repair or rebuild of the top course |
| Insert installation support (liner and fitting) | $2,200 – $4,800 | Flexible liner sized to the appliance, connection and clearing |
What moves the number up or down is mostly flue geometry and condition. A straight, accessible flue cleans quickly. A flue with an offset, a tight smoke chamber, or a top that’s hard to reach takes longer and costs more. Cracked tiles push the job toward HeatShield resurfacing instead of a simple sweep. A chimney with failing tile and gaps that can’t be sealed moves into relining territory, which is the single biggest line item on this list. Damage we find during the sweep can be corrected by the same team rather than referred out, which usually keeps the total lower than hiring a sweep and a repair contractor separately.
The other honest driver is the two-flue problem. Many homes here have a fireplace and a dryer vent that both need attention and both get skipped. We handle both in a single visit. Call (877) 269-3953 to price them together.
What Affects Fireplace Services Pricing in Tarzana
Fireplace work here isn’t the same as fireplace work in a colder climate. Tarzana sits in a warm, dry pocket of the San Fernando Valley, and that shapes what these jobs actually require. Winters are mild, so most fireplaces see occasional seasonal use rather than months of daily burn. There’s a flip side to that: a fireplace used a few weekends a year gets inspected less often, and creosote can sit in a flue for years before anyone looks.
- Flue length and height. A liner is priced partly by the length it has to cover. Taller chimneys mean more material and more labor. A single-story ranch house keeps costs down; a two-story with a full run adds to the total.
- How much creosote is present. Light, dusty creosote sweeps out quickly. Glazed, hard creosote takes more time and sometimes more than one visit, which pushes the price toward the top of the sweep range.
- Liner condition. Intact clay tiles mean a sweep and a report. Cracked or spalled tiles with gaps mean HeatShield resurfacing, and a flue that’s too far gone for resurfacing needs a DuraFlex liner.
- Chimney access and roof pitch. A flue that’s easy to reach from the roofline is faster to service. Steep or awkward roof access adds time. This is not a job to attempt from a ladder at home. Height work around a chimney is one of the places where a trained technician with the right equipment matters, so we handle the roof access ourselves.
- Fireplace type. A standard open fireplace is the simplest. A wood stove insert or a conversion needs a liner sized to the appliance, which is a separate order of work.
- Condition of the firebox and damper. Cracked firebox brick, a warped damper, or a rusted damper assembly all add repair line items on top of the sweep.
Dryer vent cleaning is priced as its own small job, and it’s worth calling out because lint buildup in a dryer duct is a real fire hazard and one that chimney-only outfits tend to leave alone. Two fire hazards, one specialist, one visit. It’s the reason we pair the two services rather than treating the dryer vent as an add-on nobody asks about.
If you’re new to the area, our Tarzana page covers what we see across the neighborhood and how the local housing stock shapes the work. And if you’re starting from scratch with a chimney you know nothing about, the main chimney sweep Tarzana page explains what a first visit involves.
How to Save on Fireplace Services
There’s no magic discount here, but there are a few practical ways to keep the total reasonable.
- Get the sweep before the damage spreads. A $199-to-$425 sweep today is far cheaper than a HeatShield job or a liner replacement later. The math on catching a cracked tile early is the best savings argument there is.
- Bundle the fireplace and the dryer vent in one visit. One trip, one estimate, both flues cleared. This is where pairing services beats booking two separate contractors.
- Ask about HeatShield before you assume you need a full reline. Ceramic flue resurfacing repairs a cracked or deteriorated liner at a fraction of the cost of a full DuraFlex install. It’s not always the right call, but it’s worth finding out before you budget for a new liner. Built to last, not patched to pass, means we’ll tell you when resurfacing won’t hold and a liner is the honest answer.
- Get the estimate in writing. Free estimates mean you’re comparing real numbers, not guesses. Ask what’s included: sweep, inspection, and any repair line items should be spelled out.
- Deal with the dryer vent. Lint buildup is cheap to clear and expensive to ignore. It’s the most-skipped flue in the house.
We work with professional-grade materials, and that matters for what you’re buying. Our liners and repair systems come from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Cut-rate outfits often don’t stock these; we do, which means a repair found during your sweep can be handled with the right part rather than a generic patch. Call (877) 269-3953 for a free estimate and we’ll tell you which of these your chimney actually needs.
Can You Do the Sweep and the Repair in the Same Visit?
Often, yes. A routine sweep and a repair like a firebox patch or a cap fitting can usually be handled in the same appointment. Larger jobs, like a full DuraFlex liner install, are typically scheduled after the sweep inspection reveals what’s needed. The point is continuity: findings from your sweep don’t get referred out to a second company. The same team that found the cracked tile fixes it. That’s the difference between a sweep-and-goodbye outfit and one that handles the whole job.
Call (877) 269-3953 to book. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. A call outside those hours is booked into the next opening.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Tarzana?
A standard chimney sweep with a Level 1 inspection in Tarzana typically costs $199 to $425. The low end covers a straight, accessible flue with light creosote; the high end covers heavier buildup, awkward roof access, or a two-story flue. Call (877) 269-3953 for a free estimate that fits your fireplace.
Is it cheaper to repair a liner or replace it?
Repair usually costs less when it’s viable. HeatShield ceramic resurfacing runs $600 to $1,400 and fixes cracked or deteriorated joints without a full reline. A full DuraFlex liner installation runs $1,800 to $4,500. Whether resurfacing is the right call depends on how much of the liner is failing; a sweep inspection tells you which side of that line you’re on. Call (877) 269-3953 and we’ll give you an honest answer with a written estimate.
How much does dryer vent cleaning cost?
Dryer vent cleaning in Tarzana typically costs $125 to $275, and we handle it in the same visit as a fireplace sweep. Lint buildup is one of the most commonly skipped fire hazards in a home, and pricing it alongside the chimney usually beats hiring a separate contractor. Call (877) 269-3953 to book both.
Can you come the same day?
Same-day service is often possible, depending on the schedule. We dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday. We answer 24/7, so a call that comes in outside dispatch hours is booked into the next opening. Call (877) 269-3953.
Do I need a permit for chimney repair in Tarzana?
Some chimney repair work, including structural changes to a chimney, may require a permit from your city’s building department, so it’s always worth asking them directly before work starts. A routine sweep and inspection generally does not. When you get your estimate, ask us what your specific repair involves and we’ll tell you what’s typically required. Call (877) 269-3953 with questions, and estimates are free.
What Should a Free Fireplace Estimate Include?
An estimate that’s worth anything lists the scope: what the sweep covers, what the inspection checks, and any repair line items with a stated range. It should name the materials if repair is involved, so you know whether you’re getting a HeatShield resurfacing or a DuraFlex liner rather than a vague “flue repair.” It should state, in writing, that the estimate sets the final price. We give you all of that. If a crew quotes a chimney job without a written scope, keep looking.
One more thing worth knowing before you call: fireplaces here tend to sit dormant for long stretches because winters are mild. That’s the reason so many homes in this part of the Valley have flues that haven’t been looked at in years. A sweep and inspection is the cheapest way to find out where yours stands. Call (877) 269-3953. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re 12 years into serving Tarzana, since 2014, and the free estimate is the same today as it was then: a real number in writing, per job.
You can also read more about the full range of what we do on our chimney sweep Tarzana homepage and see neighborhood details on the Tarzana page.
Pricing reflects the Tarzana market as of 2026. Chimney Sweep Tarzana offers free estimates – call (877) 269-3953.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Emily Park"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Arjun Singh"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Paul Schaefer