Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Tarzana?
A chimney liner installation in Tarzana typically runs $2,600 to $6,800, and a partial chimney rebuild usually lands between $1,900 and $6,500 depending on how much brick and flue work is involved. Full-top-to-bottom rebuilds on a taller masonry chimney can reach $12,000 or more. A HeatShield ceramic resurfacing job, which restores a cracked flue without removing the old liner, tends to come in lower than a full reline.
Those are estimates for a typical Tarzana home, not quotes. The only number that sets your price is the written estimate you get after we’ve looked at the flue and the brickwork in person. Call (877) 269-3953 to book a free one. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items usually stack up for Tarzana homeowners this year. Every figure is a typical estimated range for the local market. Your job may sit above or below it once the flue is measured and the masonry is examined.
| Work item | Typical estimated range |
|---|---|
| Camera inspection and written assessment | Free with a scheduled estimate |
| Standard chimney sweep before lining work | $150 – $320 |
| HeatShield ceramic flue resurfacing (no full reline) | $1,400 – $3,200 |
| DuraFlex flexible stainless liner, standard fireplace flue | $2,600 – $4,900 |
| DuraFlex liner for a stove insert, oil appliance, or fireplace conversion | $3,400 – $6,800 |
| New top plate, cap, and crown repair | $350 – $1,100 |
| Partial rebuild (upper courses of brick, one face) | $1,900 – $6,500 |
| Full chimney rebuild, top to roofline | $6,000 – $12,000+ |
| Flue tile replacement, individual sections | $600 – $1,800 |
| Dryer vent cleaning (often booked with the chimney) | $120 – $250 |
What pushes a job toward the top of those ranges? A flue that’s offset, oversized, or has a sharp bend in it takes a longer liner run and more fitting time. Masonry that has spalled well below the roofline means more brick to cut out and replace. And a chimney on a tile roof in Tarzana usually needs more careful flashing work than one on composition shingle, which adds labor.
What pulls it down? A flue that’s mostly sound and only needs resurfacing rather than a full stainless liner. A single-story chimney with easy roof access. And catching the problem before water has worked into the brick, since water damage is what turns a repair into a rebuild.
We use HeatShield and DuraFlex because both are designed for long-term flue restoration, not temporary patching. That matters when you’re spending thousands: the goal is a liner and rebuild built to last, not patched to pass.
What Affects Chimney Liner & Rebuild Pricing in Tarzana
- Flue size and shape. A straight, correctly sized flue takes an off-the-shelf DuraFlex liner. An offset flue, or one that was built for an old appliance and no longer matches your fireplace, needs a custom run and more labor.
- Height of the chimney. A single-story ranch home off Ventura Boulevard has a shorter, cheaper run than a taller two-story house. Liner is priced partly by the linear foot, and every extra foot of height adds ladder and staging time.
- Condition of the brick and mortar. Tarzana sits in a warm, dry valley climate, which is easier on masonry than a wet climate, but the region’s occasional heavy winter rain still finds its way into cracked mortar and a failed crown. Once water gets behind the brick and the mortar starts to crumble, a resurfacing job becomes a rebuild.
- Crown and cap condition. A cracked crown is one of the most common things we find. Fixing it during a liner job costs a fraction of what it costs after years of water intrusion have reached the flue tiles.
- Appliance type. A wood-burning fireplace, a stove insert, an oil appliance, and a fireplace conversion each call for a different liner spec. A conversion or insert job typically costs more than lining a straightforward open fireplace.
- Access and roofline. Steep pitches, skylights, and tight side yards slow the work and add labor. Tile roofs common in this part of the valley need particular care around flashing.
One more factor worth naming: how long the problem has been there. A flue that’s been quietly deteriorating for years usually costs more to set right than one caught during a routine sweep. If you’ve recently moved into an older Tarzana home and don’t know the service history, an inspection is the cheapest way to find out where you stand.
How to Save on Chimney Liner & Rebuild
The biggest savings come from timing. Addressing a cracked crown or a deteriorating flue tile before water gets into the masonry usually costs a fraction of a rebuild. A repair caught early stays a repair.
- Get the inspection before the damage spreads. A sweep and camera inspection is far cheaper than the rebuild it can help you avoid. If your system hasn’t been looked at in several years, start there.
- Ask about HeatShield before you assume you need a full reline. When the flue is cracked but still structurally sound, ceramic resurfacing can restore it at lower cost than pulling the old liner out. We’ll tell you honestly which one your flue actually needs.
- Bundle the dryer vent. If you’re already booking a chimney sweep, adding dryer vent cleaning to the same visit saves you a second appointment and a second call-out. It also tackles the other leading household fire hazard in the same trip.
- Fix the crown and cap while the crew is on the roof. These are small line items on their own; folded into a liner or rebuild job, they cost less in labor than a separate return visit.
- Get a written estimate, in writing, before work starts. It sets the final price and tells you exactly which products are going in.
Every estimate from us is free, and the price is set per job by the written estimate. Call (877) 269-3953 and we’ll get you on the schedule.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Tarzana?
A standard DuraFlex stainless liner for a fireplace flue in Tarzana typically costs $2,600 to $4,900 installed, and a liner for a stove insert, oil appliance, or fireplace conversion usually runs $3,400 to $6,800. The range depends on flue size, chimney height, and whether the flue is straight or offset. Call (877) 269-3953 for an exact figure on your chimney; estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper when the flue is cracked but still structurally sound, and a HeatShield ceramic resurfacing at $1,400 to $3,200 typically costs less than a full reline. If the liner is disintegrating, has gaps, or the flue tiles have separated, a full DuraFlex reline is the right call and patching won’t hold. We’ll show you what the camera sees and tell you which one you actually need. Call (877) 269-3953 to book the inspection.
How much does a chimney rebuild cost in Tarzana?
A partial chimney rebuild in Tarzana usually runs $1,900 to $6,500, and a full rebuild from the roofline up typically costs $6,000 to $12,000 or more. The spread comes down to how far the damaged masonry extends and how much of the flue has to come out with it. Call (877) 269-3953 and we’ll give you a written estimate that sets the final price.
Can you come today?
Same-day service is often possible depending on the day’s schedule. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday, so a call outside dispatch hours is booked into the next opening. We’re closed on Saturday, but a call that day gets you scheduled for Sunday. Call (877) 269-3953.
Why does the rebuild cost more than the liner?
Rebuild pricing runs higher because it involves cutting out and replacing brick and mortar, not just running a liner down the flue. Masonry work takes time, and matching new brick to an existing chimney face is part of the job. When both are needed, doing them together usually costs less than two separate visits. Call (877) 269-3953 for a combined estimate.
What Happens When You Call
We start with a look at the flue and the masonry. A camera inspection tells us whether you’re looking at resurfacing, a reline, or a rebuild, and a written estimate spells out the products and the price before anyone touches the chimney. Because we handle sweeping, repair, and lining in-house, a problem found during the sweep can be corrected by the same team rather than referred out to a second contractor. If your dryer vent hasn’t been cleaned in a while, we can take care of that on the same visit, which means two fire hazards handled in one appointment instead of two.
Our technicians work only on chimneys and ventilation, so they’re not bouncing between unrelated trades. We stock and install products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, which means we can match the right liner and repair material to your flue instead of working with whatever a cut-rate outfit happens to carry.
If you’ve got a fireplace you use seasonally or year-round, or you’ve just moved into an older home and don’t know its chimney history, the fastest way to a real number is an inspection. Read more about our full scope on the Chimney Sweep Tarzana home page, or start with what we offer across Tarzana.
Book Your Free Estimate
Call (877) 269-3953 for a free estimate on chimney liner and rebuild work. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Tell us what you’ve noticed, whether it’s a cracked flue, a crumbling crown, or a fireplace that’s never been looked at, and we’ll get a technician out to assess it and give you a written price.
Written by the team at Chimney Sweep Tarzana, serving Tarzana since 2014.
Pricing reflects the Tarzana market as of 2026. Chimney Sweep Tarzana offers free estimates – call (877) 269-3953.
What Our Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Paul Schaefer"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Yolanda Salazar"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Javier Castillo